AKIBO World Wide Exporter
Export Product
AKIBO Export Product Line-up
Motorcycle
Bicycle Parts & Tools
SHIMANO
CHERUBIM
−HOZAN
FOOTMAX
YMT
K & H

AUTOMOBILE (CAR)
Outboard Parts

HOZAN

SPOKE THREADING MASTER
C-701
It's easy to make spokes of different lengths. Minimum length : 75mm. And you can build a wheel with a combination of various rims and hubs. The process will be only 30 sec.

SPOKE TENSION METER
C-737
Used for measuring tensile strength of spoke. Hook supporting pin and press down the handle till handle pin touches spoke. Then read dial indicator. Calibration chart is included.

SPOKE THREAD CHASER
C-700
HOZAN unique screwing tool permits to make any length of spokes.
Featuring a strengthened high-speed steel die. Applicable with stainless steel spokes.

BALL RACE REMOVER
C-440
This tool is designed for only removing ball race which is one of head parts.
It enables to remove the ball race surely, neither giving a damage to the ball race nor the fork crown.

HEAD CUP PRESS
C-448
The C-448 is new tool for head-cup press, easy & safety maintenance. The upper piece consist of the handle, shaft, and upper step-ring and lower step-ring piece. So you can easy and quickly work surely.
If you turn the handle counter clockwise too much, C-448's handle stays at the top, it will not come off.
It has integrated bearing type. You can work with long head-tube over 300mm using C-449 extention.

HEAD RACE PLIERS (LOCKRING PLIERS)
C-203
The design of the jaws and the pegs at its end will grip lockring tight.

LOCKRING WRENCH
C-205
This lockring wrench will fit most of bottom bracket lockrings.

INNER WIRE PLIERS
C-356
Grasps the inner cable and pulls it tight, holding its tention while pinch-bolt is pulled up.

HOZAN
http://www.hozan.co.jp/cycle_e/


Page Top
Inquary

AKIBO World Wide Exporter AKIBO CORPORATION
Head Office: 5-758, Nakamozucho, Kita-ku, Sakai, Osaka 591-8023, Japan
E-mail.info.f@akibo.co.jp / Telephone 81(0)72−258−4000 / facsimile 81(0)72−254−0230
(C) AKIBO corporation. All rights reserved.
ContactSiteMap